Repeatedly using the decomposition product of struvite by ultrasound stripping to remove ammonia nitrogen from landfill leachate

In this study, the decomposition of struvite by ultrasound stripping and the recycle use of the decomposition product for the treatment of landfill leachate were investigated. The results indicated that when the decomposition of struvite by ultrasound stripping was performed at 55 °C for 40 min, the ammonium in the struvite could be almost completely eliminated from the solution system. The characterization analysis showed that magnesium phosphate and the dissolved phosphate ions were the main active derivatives. Approximately 90% of the total ammonia nitrogen (TAN) in landfill leachate can be removed by reusing the decomposition product at pH 9 for 60 min. Repeated use of the struvite decomposition product revealed that the TAN removal efficiency decreased with an increase in the number of recycles. However, in the process of multiple recycling, about 90% of TAN removal could be maintained by supplementing a certain amount of the preformed struvite to the solution for every recycle. An economic analysis demonstrated that 79.3% of the treatment cost could be saved by the proposed process compared to the non-recycling process.     

Block copolymers derived from polyisobutylene oligomers

The synthesis of polyvalent functionalized polyisobutylene (PIB) oligomers containing multiple polar groups via radical polymerization is described. Polymerizations from PIB macroinitiators via alkylborane intermediates can form block copolymers but the polar block is consistently larger than the PIB block and unless a hydrophobic monomer is used, the products are insoluble in alkanes. Block copolymer products from ATRP macroinitiators are formed with more control over the degree of polymerization of a polar block from a 1000 Da PIB starting material but are still alkane insoluble because the degree of polymerization of the polar block was consistently equal to or greater than the degree of polymerization of the PIB block. RAFT polymerization using 5 mol % of azoisobutyronitrile relative to a PIB macroinitiator however was successful in producing acceptable yields of alkane soluble block copolymers using a 1000 Da PIB starting material and monomers like methyl methacrylacrylate, ethyl methacrylate, N,N‐dimethylacrylamide, and N‐isopropylacrylamide. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1860–1867     

Application of copper sulfate pentahydrate as an ammonia removal reagent for the determination of trace impurities in ammonia by gas chromatography

Rapid analysis of trace permanent gas impurities in high purity ammonia gas for the microelectronics industry is described, using a gas chromatograph equipped with a phtoionization detector. Our system incorporates a reactive precolumn in combination with the analytical column to remove the ammonia matrix peak that otherwise would complicate the measurements due to baseline fluctuations and loss of analytes. The performance of 21 precolumn candidate materials was evaluated. Copper sulfate pentahydrate (CuSO₄·5H₂O) was shown to selectively react with ammonia at room temperature and atmospheric column pressures, without affecting the hydrogen, oxygen, nitrogen, methane or carbon monoxide peak areas. To prevent loss of trace carbon dioxide, an additional boron trioxide reactant layer was inserted above the copper sulfate pentahydrate bed in the reactive precolumn. Using the combined materials, calibration curves for carbon dioxide proved to be equivalent in both ammonia and helium matrix gases. These curves were equivalent in both matrix gases. The quantitative performance of the system was also evaluated. Peak repeatabilities, based on eight injections, were in the range of 4.1–8.2% relative standard deviation; and detection limits were 6.9 ppb for H₂, 1.8 ppb for O₂, 1.6 ppb for N₂, 6.4 ppb for CH₄, 13 ppb for CO, and 5.4 ppb for CO₂.     

Synthesis, structure determination, and (radio-)fluorination of novel functionalized phosphanes suitable for the traceless Staudinger ligation

An elegant and efficient synthesis approach for the preparation of novel benzoate and nicotinate containing phosphanes is presented. This reaction path has a broad substrate scope. Thus, various functionalized phosphanes were obtained in high yields using an esterification procedure under Steglich conditions. A facile blocking of the phosphorus atom with BH₃ was carried out. BH₃ as easily insertable and removable protecting group enables a further derivatization of the benzoate residue. The prepared phosphane derivatives proved to be valuable labeling building blocks for the implementation of a bioorthogonal (radio-)fluorination strategy and were applied for labeling purposes using the traceless Staudinger ligation. For this purpose, a selection of azide-functionalized small organic and bioactive sample molecules was prepared. Furthermore, a mild and selective (radio-)fluorination of these derivatives is demonstrated adopting this bioorthogonal ligation method.     

蒸氨法制备铜硅催化剂的二甲醚水蒸气重整制氢性能

采用蒸氨法制备出不同Cu负载量的xCu/SiO_2-AE催化剂,并将其用于二甲醚水蒸气重整制氢反应。当Cu负载量为30%(w)时,30Cu/SiO_2-AE催化剂表现出最佳的催化性能。结果显示,该方法制备的催化剂表面具有高度分散的CuO和层状硅酸铜物相,经还原后分别形成Cu~0和Cu~+物种。与常规浸渍法制备的30Cu/SiO_2-IM催化剂相比,蒸氨法制备的30Cu/SiO_2-AE催化剂具有优异的催化稳定性和活性,这与其独特的层状结构和表面Cu~0与Cu~+之间的协同作用相关。     

负载型双金属催化剂的制备及其等离子体催化氨分解制氢性能

利用等体积浸渍法制备了Fe-Co、Fe-Ni、Mo-Co、Mo-Ni双金属催化剂(总金属含量均为10%(w,质量分数),双金属摩尔比均为1:1),考察了其在等离子体条件下氨分解活性,结果表明Fe-Ni双金属催化剂表现出较好的协同作用。在此基础上,进一步考察了Fe/Ni摩尔比对其活性的影响。结果表明:当Fe/Ni摩尔比为6/4时,氨分解活性最好,而且该双金属催化剂稳定性良好。采用N_2物理吸附、X射线衍射(XRD)、H_2-程序升温还原(H_2-TPR)和高分辨透射电子显微镜(HRTEM)对催化剂的物化性质、还原性能、微观形貌等进行了研究。结果表明:活性较好的Fe-Ni双金属催化剂中,Fe与Ni形成尖晶石结构NiFe_2O_4,该结构有利于Fe和Ni的还原,即活性组分易恢复金属态,这可能是其活性较高的原因。     

Nanostructured Platinum‐iridium Alloy Microelectrode for Ammonia Determination

Nanostructured platinum‐iridium alloy microelectrode with high surface area was successfully prepared by applying successive potential cycles to a conventional PtIr microdisc in ionic liquid electrolyte containing ZnCl₂ at elevated temperature. Scanning‐electron microscope studies show that a very thin nanostructured film was created on the electrode upon 20 potential cycles between −2.0 and 0.75 V versus a Ag pseudo‐reference electrode. The film nanostructures are characteristic of regular hill‐like nano‐spacings separated by valley‐like nano‐cracks, and a roughness factor of approximately 40. The nanostructured electrode is highly active towards electrochemical oxidation of ammonia, and generates a linear relation between voltammetric peak currents (or chronoamperometric currents), and logarithm of ammonia concentration in a range of approximately 1 ppm to 10000 ppm. It has been proposed that the Temkin adsorption of ammonia from the bulk solution onto the electrode surfaces was involved in its electrochemical oxidation and could be responsible for the linear current‐logarithmic concentration relation.     

Recent development of aminophosphine chalcogenides and boranes as ligands in s-block metal chemistry

The coordination chemistry of the aminophosphine chalcogenide ligands [Ph₂P(O)NHR], [Ph₂P(S)NHR], and [Ph₂P(Se)NHR] (R = 2,6-Me₂C₆H₃,^tBu, CHPh₂, CPh₃) or corresponding borane derivative [Ph₂P(BH₃)NHR] toward group 1 and 2 metals is reviewed. The structural characterization of a huge number of mono- and bis-aminophosphine chalcogenide/borane complexes with group 1 and 2 metals—in most cases lithium, sodium, potassium, magnesium, calcium, strontium, and barium complexes—reveals a poly-metallacyclic motif in each case. The coordination takes place from adjacent chalcogen/borane and nitrogen as donor atom or group of the ligand confirming the direct bond between metal and chalcogen/borane to develop homoleptic and heteroleptic complexes. The heteroleptic group 2 metal complexes were used as pre-catalysts in hydrophosphination and hydroamination reactions. Similarly, aminophosphine chalcogenide alkaline earth metal complexes were used in the catalytic ring-opening polymerization (ROP) study of ?-caprolactone.     

多孔碳负载镍纳米颗粒的制备及催化氨硼烷水解制氢

合成了蜂窝状的分级多孔碳,并以多孔碳为载体通过浸渍-化学还原法制备碳载镍(Ni/C)作为催化氨硼烷水解制氢的催化剂。采用XRD、BET、SEM、Raman、TEM等手段对样品进行了表征并研究了Ni/C室温催化性能。结果显示,多孔碳比表面积高达737 m²·g^-1,具有部分石墨化结构;负载的非晶态镍纳米颗粒平均粒径约为10 nm,均匀分布在碳基材。碳载镍对氨硼烷水解反应具有良好的催化活性,镍负载量为30wt%时催化性能最佳,298 K温度下放氢速率达到1 304.67 mL·min^-1·g^-1,活化能为29.1 kJ·mol^-1,并且具备一定的催化稳定性,表明Ni/C可作为一种廉价高效的催化剂应用于催化氨硼烷水解制氢。     

Effect of oxyfluorination on gas sensing behavior of polyaniline-coated multi-walled carbon nanotubes

Polyaniline-coated multi-walled carbon nanotubes were prepared by in situ chemical polymerization method for the novel sensing materials of ammonia gas. The thickness of the polyaniline coatings was controlled by the oxyfluorination treatment on the multi-walled carbon nanotubes. The oxyfluorination with higher oxygen content produced the more hydrophilic functional groups on the surface of multi-walled carbon nanotubes. Both the resistivity change and the response time were significantly improved with high repeatability using the more hydrophilic multi-walled carbon nanotubes which were modified with oxyfluorination.